Manual

Supplementary Services Commands
Connected Line Identification Presentation +COLP
©Restricted
Page: 176 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.5.3 Parameters and Defined Values
<n>: parameter sets/shows the result code presentation status in the
TA
0 disable (default value)
1 enable
<m>: parameter shows the subscriber COLP service status in the
network
0 COLP not provisioned
1 COLP provisioned
2 unknown (no network)
<number>: phone number
string type
<type>: TON/NPI for <number>
145 international number
<num> includes the international access code character "+".
129 national number
<num> does not include the international access code
character "+".
<subaddr> subaddress
string type
<satype>: TON/NPI for <subaddr>
145 international number
<num> includes the international access code character "+".
129 national number
<num> does not include the international access code
character "+".
<alpha>: phonebook name associated with <number>
string type
20.5.4 Parameter Storage
The <n> parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.