Manual

SIM ToolKit Commands
SIM ToolKit Set Facilities +STSF
©Restricted
Page: 140 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
19.2 SIM ToolKit Set Facilities +STSF
19.2.1 Description
This Wavecom proprietary command allows SIM ToolKit facilities to be activated,
deactivated or configured.
The activation or deactivation of the SIM ToolKit functionalities requires the use of the
+CFUN (Set phone functionality) command to reset the product. This operation is not
necessary if PIN is not entered yet.
19.2.2 Syntax
Action command
AT+STSF=<mode>[,[<Config>][,[<Timeout>][,<AutoResponse>]]]
OK
Read command
AT+STSF?
+STSF: <mode>,<Config>,<Timeout>,<Autoresponse>
OK
Test command
AT+STSF=?
+STSF: (list of supported <mode>s),(list of supported <Config>s),
(list of supported <Timeout>s),(list of supported <AutoResponse>s)
OK