Manual

Open AT
®
Commands
Wavecom Downloading +WDWL
©Restricted
Page: 37 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
5.1.5 Examples
Com mand Responses
AT+WDWL?
Note: Get downloader version.
+WDWL: V02.12
OK
AT+WDWL
+WDWL: 0
Note: Download mode started. File can be sent using the
terminal application
AT+CFUN=1
OK
5.1.6 Notes
+WDWL command allows to launch the download process only on the UART1 port.
Downloading is performed using the 1K-XMODEM protocol.
This command is unsupported when using a serial USB emulated port.
The flow control of the hyperterminal has to be set to "Hardware".
Caution:
Software damages may occur if power is lost or if a hardware reset occurs during the
downloading phase. This would seriously affect Wireless CPU
®
behavior.