Manual

Short message Commands
Show Text Mode Parameters +CSDH
©Restricted
Page: 79 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.7 Show Text Mode Parameters +CSDH
17.7.1 Description
This command gives additional information on text mode result codes. This
information can be found in the description of the +CMT, +CMGR, +CMGL
commands and responses.
17.7.2 Syntax
Action command
AT+CSDH=<n>
OK
Read command
AT+CSDH?
+CSDH: <n>
OK
Test command
AT+CSDH=?
+CSDH: (list of supported <n>s)
OK
17.7.3 Parameters and Defined Values
<n>: show text mode
0 do not show header values (default value)
1 show the values in result codes
17.7.4 Parameter Storage
The parameter <n> is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.