Manual

Short message Commands
Preferred Message Format +CMGF
©Restricted
Page: 71 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.4 Preferred Message Format +CMGF
17.4.1 Description
This commands allows to select the preferred message format. The message formats
supported are text mode and PDU mode.
17.4.2 Syntax
Action command
AT+CMGF=<mode>
OK
Read command
AT+CMGF?
+CMGF=<mode>
OK
Test command
AT+CMGF=?
+CMGF: (list of supported <mode >s)
OK
17.4.3 Parameters and Defined Values
<mode> : PDU or text mode
0 PDU mode
1 text mode (default value)
17.4.4 Parameter Storage
The <mode> parameter is stored in EEPROM using +CSAS command. The default
value can be restored using AT&F.