Manual

Phonebooks Commands
Settings of a Group +WPGS
©Restricted
Page: 50 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
16.10.3 Parameters and Defined Values
<mode>: requested operation
0 read group settings
1 write group settings
<group index>: index of a group
<restrict call>: call restriction mode
0 all refused - incoming call is forwarded to the voice mailbox
or rejected like busy line (depends on network operator)
1 all accepted - incoming call is received (RING message is
displayed)
16.10.4 Parameter Storage
None.
16.10.5 Examples
Command Responses
AT+WPGS=1,1,1
Note: Set restrict call to "All Accepted"
OK
AT+WPGS=0,1
+WPGS: 1
OK
Note: Command reads group 1 settings Note: Group 1 all accepted
AT+WPGS=?
+WPGS: (0-1),(1-10),(0-1)
Note: Test command
OK