Manual

Identifications commands
Request identification information I
©Restricted
Page: 31 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
4.9 Request identification information I
4.9.1 Description
This command causes the product to transmit one or more lines of specific
information text.
4.9.2 Syntax
Action command
ATI<n>
Depending on <n>
OK
Read command
None
Test command
None
4.9.3 Parameters and Defined Values
<n>: information display control parameter
0 display manufacturer followed by model identification
(equivalent to +CGMI and +CGMM, refer to these commands for
more precisions)
3 display revision identification (equivalent to +CGMR)
4 display Wireless CPU
®
configuration in RAM (equivalent to &V0)
5 display Wireless CPU
®
configuration in EEPROM (equivalent to
&V1)
6 display Wireless CPU
®
data features. Lists the supported data
rates, data modes and fax classes.
7 display Wireless CPU
®
voice features
other "OK" string is sent back