Manual

GPRS Commands
GPRS network registration status +CGREG
©Restricted
Page: 127 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.15.3 Parameters and Defined Values
<n>: unsolicited result code activation mode
0 disable network registration unsolicited result code (default
value)
1 enable network registration unsolicited result code +CGREG:
<stat>
2 enable network registration and location information
unsolicited result code +CGREG: <stat>,<lac>,<ci>
<stat>: network registration state
0 not registered, ME is not currently searching for a new
operator to register to
1 registered, home network
2 not registered, but ME is currently searching for a new
operator to register to
3 registration denied
4 unknown
5 registered, roaming
<lac>: location area code
two byte in hexadecimal format
string type
<ci>: cell ID
two byte in hexadecimal format
string type
14.15.4 Parameter Storage
The <n> parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.