Manual

GPRS Commands
PDP Context Modify +CGCMOD
©Restricted
Page: 125 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.14.5 Examples
Command Responses
AT+CGDCONT=1,"IP","APN"
OK
AT+CGACT=1,1
OK
AT+CGCMOD=1
OK
AT+CGCMOD=?
+CGCMOD: (1)
OK
AT+CGCMOD
Notes: Modify all the active contexts
OK
14.14.6 Notes
Once the PDP context is activated, this command can only be used to modify the QoS
which is set by the command +CGQREQ. It cannot be used to modify the minimum
acceptable QoS (set by +CGQMIN).
If no <cid>s are specified the activation form of the command modifies all active
contexts.