Manual

GPRS Commands
Quality of Service Profile (Minimum acceptable) +CGQMIN
©Restricted
Page: 115 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
<reliability>: reliability class (octet 3) (see table below)
0 subscribed reliability class
1 unused. If received, it shall be interpreted as '010'
2 unacknowledged GTP; acknowledged LLC and RLC, protected
data
3 unacknowledged GTP and LLC; acknowledged RLC, protected
data
4 unacknowledged GTP, LLC, and RLC, protected data
5 unacknowledged GTP, LLC, and RLC, unprotected data
<peak>: peak throughput class
integer type
0 subscribed
1 up to 1 000 (8 kbits/s)
2 up to 2 000 (16 kbits/s)
3 up to 4 000 (32 kbits/s)
4 up to 8 000 (64 kbits/s)
5 up to 16 000 (128 kbits/s)
6 up to 32 000 (256 kbits/s)
7 up to 64 000 (512 kbits/s)
8 up to 128 000 (1 024 kbits/s)
9 up to 256 000 (2 048 kbits/s)
<mean>: mean throughput class
range: 0-31
integer type
14.12.4 Parameter Storage
The parameters are stored in EEPROM without using the AT&W command.