Manual

GPRS Commands
Quality of Service Profile (Minimum acceptable) +CGQMIN
©Restricted
Page: 114 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
Test command
AT+CGQMIN=?
+CGQMIN: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)
[+CGQMIN: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)[…]]
OK
14.12.3 Parameters and Defined Values
<cid>: PDP context identifier
range: 1-4
integer type
<precedence>: precedence class
integer type
0 subscribed precedence (subscribed by the Network by default
if value is omitted)
1 high priority (service commitments shall be maintained ahead
of precedence classes 2 and 3)
2 normal priority (service commitments shall be maintained
ahead of precedence class 3.)
3 low priority (service commitments shall be maintained after
precedence classes 1 and 2)
<delay>: delay class (see table below)
0 subscribed
1 delay class 1
2 delay class 2
3 delay class 3
4 delay class 4