Manual

GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page: 93 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.2.6 Notes
Additional information for <class>:
Multislot class Maximum number of slots Minimum number of slots Type of MS
Rx Tx Sum Tta Ttb Tra Trb
2 2 1 3 3 2 3 1 1
8 4 1 5 3 1 2 1 1
10 4 2 5 3 1 2 1 1
12 4 4 5 2 1 2 1 1
Type 1 MS is not required to transmit and receive at the same time.
When the Wireless CPU
®
is set in the "CG" class, the ME always automatically
performs a GPRS attachment after init, so AT+WGPRS? always gives +WGPRS: 0,0
for the parameter 0.
Additional information for <mode>= 9:
• When the user enables the GPRS/EGPRS network capability indication, the
Wireless CPU
®
returns OK response, and it sends immediately an unsolicited
response.
• The unsolicited responses are sent to all ports.
• When the GPRS/EGPRS network capability indication is enabled (with +
WGPRS AT command), each time GPRS or EGPRS technologies availability are
detected on the used network, an unsolicited response +WGPRSIND will be
returned by the Wireless CPU
®
.