Manual

GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page: 91 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.2.5 Examples
Command Responses
AT+WGPRS=?
Note: Request ranges of values for a GPRS
compatible Wavecom Wireless CPU
®
+WGPRS: (0-7),(0-1),(1-4),(2,8,10)
OK
AT+WGPRS=?
Note: Request ranges of values for an EGPRS
compatible Wavecom Wireless CPU
®
+WGPRS: (0-9),(0-2),(1-
4),(0,2,8,10)
OK
AT+WGPRS=2,1,3
Note: Set <cid>=3 to be automatically activated after
initialization
OK
AT+WGPRS=7,1
Note: Set automatic re-attachment to the network
and reactivation of PDP context in case of change of
operator for MCC/MNC
OK
AT+WGPRS=4,,,8
Note: Choose GPRS multislot class 8
OK
AT+WGPRS=8,,,10
Note: Choose EGPRS multislot class 10 for an EGPRS
compatible Wavecom Wireless CPU
®
OK
AT+WGPRS=9,1
Note : Activate GPRS/EGPRS network capability
indication
OK
Note: EGPRS capabilities detected
+WGPRSIND: 2
Note: Immediate unsolicited response after activation
(see previous line)