Manual

Data Commands
Other Radio Link Parameters +DOPT
©Restricted
Page: 74 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.5.3 Parameters and Defined Values
<reset_allowed>: behaviour in case of bad radio link
0 data communication is hung up in case of bad radio link
1 data communication is held, even if the radio link is bad;
there is a possibility of losing data (default value)
<dtx_allowed>: power mode
0 normal mode
1 economic battery mode, not supported by all networks
(default value)
13.5.4 Parameter Storage
Parameters are stored in EEPROM using the AT&W command. The default value can
be restored using AT&F.
13.5.5 Examples
Command Responses
AT+DOPT=?
(0,1),(0,1)
OK
AT+DOPT=1
OK
Note: Second parameter is omitted
AT+DOPT=1,1
OK
Note: Set new parameters
AT+DOPT?
1,1
OK
AT+DOPT=,0
Note: First parameter is omitted
OK