Manual

Data Commands
DTE-DCE Local Rate Reporting +ILRR
©Restricted
Page: 69 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.3.3 Parameters and Defined Values
<value>: local port rate report
0 disable (default value)
1 enable
<rate>: current (negotiated or renegotiated) DTE-DCE speed rate
values in bps
300
600
1200
2400
4800
9600
19200
38400
57600
115200
230400
460800
921600
13.3.4 Parameter Storage
The <value> parameter are stored in EEPROM using the AT&W command. The
default value can be restored using AT&F.
13.3.5 Examples
Command Responses
AT+ILRR=?
+ILRR: (0,1)
OK
AT+ILRR=0
OK
Note: Local port rate report disabled Note: Command valid
AT+ILRR=1
OK
Note: Local port rate report enabled Note: Command valid