Manual

GSM Network Commands
Cell environment description +CCED
©Restricted
Page: 16 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
<CI> : Cell Id
string type; two bytes in hexadecimal format
If the Cell Id is not available, this parameter is omitted.
<BSIC>: Base Station Identity Code
<BCCH Freq>: Broadcast Control CHannel Freq absolute
The range depends of the selected band:
• P900 range: 1-124
• E900 range: 1-124, 975-1023 and 0 for 1024
• 850 range: 128-251
• DCS1800 range: 512-885
• PCS1900 range: 512-810
<RxLev>: RSSI level on BCCH channel, in idle mode. This parameter is empty
in dedicated mode.
0 -110 dBm or less
1 -110 dBm to -109 dBm
2 -109 dBm to -108 dBm
3-63 -108 dBm to -49 dBm
62 -49 dBm to -48 dBm
63 -48 dBm and greater
<RxLev Full>: RSSI level on all TCH channel, in dedicated mode
<RxLev Sub>: RSSI level on a subset of TCH channel, in dedicated mode
<RxQual>: signal quality on BCCH channel, in idle mode
<RxQual Full>: signal quality on all TCH channel, in dedicated mode
<RxQual Sub>: signal quality on a subset of TCH channel, in dedicated mode
<Idle TS>: Time Slot
<Main Cell TA>: Main Cell Timing Advance
<rssi>: received signal strength
0 -113 dBm or less
1 -111 dBm
2 to 30 -109 to –53 dBm
31 -51dBm or greater
99 not known or not detectable