Manual

GSM Network Commands
Cell environment description +CCED
©Restricted
Page: 15 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
16 <requested dump> 1 + <requested dump> 2 + <requested
dump> 4 + Neighbour1 to Neighbour6 Timing Advance (only
available for mode= 0)
Neighbour1 to Neighbour6 Timing Advance are only available in
IDLE mode.
+CCED: [<Main Cell dump>][[,]<Neighbor 1
dump>[,<Neighbor 2 dump>[,<Neighbor 3
dump>[,<Neighbor 4 dump>[,<Neighbor 5
dump>[,<Neighbor 6 dump>]]]]]][[,]<Main Cell
TA>][[,]<Neighbor 1 TA>][[,]<Neighbor
2TA>][[,]<Neighbor 3 TA>][[,]<Neighbor 4
TA>][[,]<Neighbor 5 TA>][[,]<Neighbor 6 TA>]
<CsqStep>: step required for the RSSI indications between two +CSQ
unsolicited responses
range: 1-5 (default value: 1)
If not indicated, the previous value is taken into account
<Main Cell
dump>:
This parameter gathers the following parameters for the Main Cell
parameters :
[<MCC>],[<MNC>],[<LAC>][,<CI>],[<BSIC>],[<BCCH
Freq>],[<RxLev>],[<RxLev Full>],[<RxLev
Sub>],[<RxQual>],[<RxQual Full>],[<RxQual
Sub>],[<Idle TS>]
<Neighbor x
dump>:
This parameter gathers the following parameters for the Neighbour
Cells parameters:
[<MCC>],[<MNC>],[<LAC>][,<CI>],[<BSIC>],[<BCCH
Freq>],[<RxLev>]
x is between 1 and 6
<Neighbor x
TA>:
Neighbour cell Timing Advance
neighbours timing Advance are not available in dedicated mode.
x is between 1 and 6
<MCC>: Mobile Country Code
3 digits
<MNC>: Mobile Network Code
2 or 3 digits
<LAC>: Location Area Code
string type; two byte location area code in hexadecimal format (e.g.
"00C3" equals 195 in decimal)