Manual

GSM Network Commands
Network Registration +CREG
©Restricted
Page: 10 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
<lac>: location area code
string type; two byte location area code in hexadecimal format
(e.g. "00C3" equals 195 in decimal)
parameter returned for <stat>= 1 or 5 and if <mode>=2
<cid>: cell ID
string type ; two byte cell ID in hexadecimal format
parameter returned for <stat>= 1 or 5 and if <mode>=2
<rejectCause> network registration denied cause
Parameter returned for <stat>=3 and if the customer application
has enabled the denied network registration cause with the
+WBHV command.
0 illegal MS
1 illegal ME
2 IMSI unknown
3 bad network authentication
11.2.4 Parameter Storage
The <mode> parameter is stored in EPROM using AT&W command. The default
value can be restored using AT&F.