Manual

GSM Network Commands
Network Registration +CREG
©Restricted
Page: 8 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
11.2 Network Registration +CREG
11.2.1 Description
This command is used by the application to check the registration status of the
product.
11.2.2 Syntax
Action command
AT+CREG=<mode>
OK
• For <stat> ≠ 3 (nominal case)
Read command
AT+CREG?
+CREG: <mode>,<stat>[,<lac>,<cid>]
OK
• For <stat> = 3 (specific case)
Read command
AT+CREG?
+CREG: <mode>,<stat>[,<rejectCause>]
OK
Test command
AT+CREG=?
+CREG: (list of supported <mode>s)
OK