Manual

Security Commands
Enter PIN +CPIN
©Restricted
Page: 165 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
9.1.3 Parameters and Defined Values
<NewPin>: Personal Identification Number
This parameter is required if the PIN state is SIM PUK.
four to eight digits number
<pin>: Personal Identification Number
normally PIN 1/CHV 1
According to AT+CPIN?, the <pin> parameter can be
PUK 1, PH-SIM PIN, PH-NET PIN, PH-NETSUB PIN,
PH-SERVPROV PIN, PH-CORPORATE PIN
four to eight digits number
<code>: SIM code status
READY ME is not writing for any password
SIM PIN PIN 1/CHV 1 is required
SIM PUK PUK1 is required
SIM PIN2 PIN 2/CHV 2 is required
SIM PUK2 PUK2 is required
PH-SIM PIN SIM lock (phone-to-SIM) is required
PH-NET PIN network personalization is required
PH-NETSUB PIN network subset is required
PH- SERVPROV PIN service provider is required
PH- CORPORATE PIN corporate is required
9.1.4 Parameter Storage
None.