Manual

Serial Port Commands
Wavecom Ring Indicator Mode +WRIM
©Restricted
Page: 151 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.10 Wavecom Ring Indicator Mode +WRIM
8.10.1 Description
This Wavecom proprietary command sets the state of the Ring Indicator Mode.
8.10.2 Syntax
Action command
AT+WRIM=<mode>[,<events_bit_field>[,<pulse_width>]]
OK
Read command
None
Test command
AT+WRIM=?
+WRIM: <mode>[,<events_bit_field>[,<pulse_width>]]
[+WRIM: <mode>[,<events_bit_field>[,<pulse_width>]][…]]
OK