Manual

Serial Port Commands
Echo E
©Restricted
Page: 134 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8 Serial Port Commands
8.1 Echo E
8.1.1 Description.
This command is used to determine whether the Wireless CPU
®
echoes characters
received by an external application (DTE) or not.
8.1.2 Syntax
Action command
ATE[<n>]
OK
Read command
None
Test command
None
8.1.3 Parameters and Defined Values
<n>: echo activation parameter
0 Characters are not echoed (default value if <n> omitted)
1 Characters are echoed.
8.1.4 Parameter Storage
The <n> parameter is stored in EEPROM using AT&W command.
8.1.5 Examples
Command Responses
ATE0
Note: Characters are not echoed
OK
Note: Done
ATE1
Note: Characters are echoed
OK
Note: Done