Manual

Wireless CPU
®
Status Commands
Wavecom Status Request +WSTR
©Restricted
Page: 132 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.7 Wavecom Status Request +WSTR
7.7.1 Description
This Wavecom proprietary command returns some operation status. It can be used to
check the state of the initialization sequence and the network status.
7.7.2 Syntax
Action command
AT+WSTR=<req status>
+WSTR: <req status>,<value>
OK
Read command
None
Test command
AT+WSTR=?
+WSTR: (list of supported <req status>s)
OK
7.7.3 Parameters and Defined Values
<req status>: requested status
1 initialization sequence status
2 network status
<value>: current status
For <req status>=1 For<req status>=2
0 not started no network
1 ongoing network available
2 finished
7.7.4 Parameter Storage
None.