User guide

DS3134
189 of 203
SECTION 12: AC CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS*
Voltage on Any Lead with Respect to VSS (except VDD) -0.3V to 5.5V
Supply Voltage (VDD) with Respect to VSS -0.3V to 3.63V
Operating Temperature 0C to +70C
Storage Temperature -55C to +125C
Soldering Temperature See J-STD-020A specification
* This is a stress rating only and functional operation of the device at these or any other conditions above
those indicated in the operation sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods of time may affect reliability.
Note: The typical values listed below are not production tested.
RECOMMEND DC OPERATING CONDITIONS (0°C TO +70°C)
Parameter Symbol Min Typ Max Units Notes
Logic 1 VIH 2.0 5.5 V
Logic 1 (Schmitt Input for PCLK) VIHS 1.7 5.5 V
Logic 0 VIL -0.3 0.8 V
Logic 0 (Schmitt Input for PCLK) VILS -0.3 0.7 V
Supply V
DD
3.0 3.6 V
DC CHARACTERISTICS (0°C TO +70°C; VDD = 3.0V TO 3.6V)
Parameter Symbol Min Typ Max Units Notes
Supply Current @ V
DD
= 3.6V IDD TBD ma 1
Lead Capacitance CIO 7 pF
Schmitt Hysteresis VTH 0.6 V
Input Leakage IIL -10 +10 uA 2
Input Leakage (w/ pull-ups) IILP -500 +500 uA 2
Output Leakage ILO -10 +10 uA 3
Output Current (2.4V) IOH -4.0 mA
Output Current (0.4V) IOL +4.0 mA
Notes:
1. RC0 to RC15 and TC0 to TC15 = 2.048 MHz / PCLK = 33 MHz / other inputs at V
DD
or grounded /
other outputs left open circuited.
2. 0V < V
IN
< V
DD
.
3. Outputs in Tri-State.