Instruction Manual

DS2130Q

041295 12/22

PCM AND CPX INPUT/OUTPUT

The organization of the CPX-side input and output time

slots on the DS2130 depends upon the state of bit CXS3

in the VCR. When CXS3=0, all time slots for CPXOUT

and CPXIN are four bits wide; when CXS=1,all time

slots are eight bits wide. Also, when CXS3=1, all

CPXOUT data is repeated in the next CPXFS sample;

therefore, only one out of every two CPXOUT samples

needs to be actually used. However, CPXIN data must

be repeated twice when CXS3=1.

PCM-side time slots are always eight bits wide, regard-

less of CXS3. Figure 10 demonstrates how the DS2130

handles the I/O when CXS3=0; Figure 11 likewise

shows the I/O when CXS3=1. It is assumed in both fig-

ures that the input and output time slots for both chan-

nels are set to zero.

PCM/CPX I/O (CXS3=0) Figure 10

MSB LSB

LSB

MSB

3–STATE

MSB LSB

MSB

MSB LSB

LSB

MSB LSB

3–STATE

CPXOUT

PCMIN

CPXFS, PCMFS

PCMCLK,CPXCLK

CPXIN

PCMOUT

(CXS1=0,CSX2=1)

(CXS1=1,CSX2=1)

(CXS1=0,CSX2=0)

(CXS1=0,CSX2=1)

(CXS1=1,CSX2=0)

(CXS1=0,CSX2=0)

NOTE:

1. The CPXFS and PCMFS frame sync pulses must be at least 1 CPXCLK or PCMCLK high.