User guide

DS1875
Table 02h, Register B9h: FETG ENABLE
0
FACTORY DEFAULT 00h
READ ACCESS PW2
WRITE ACCESS PW2
MEMORY TYPE Nonvolatile (SEE)
B9h TXP HI EN TXP LO EN BIAS HI EN
BIAS MAX
EN
RESERVED RESERVED RESERVED RESERVED
BIT 7 BIT 0
Configures the maskable interrupt for the FETG pin.
BIT 7
TXP HI EN: Enables/disables active interrupts on the FETG pin due to TXP fast comparisons above the
threshold limit.
0 = Disable (Default)
1 = Enable
BIT 6
TXP LO EN: Enables/disables active interrupts on the FETG pin due to TXP fast comparisons below the
threshold limit.
0 = Disable (Default)
1 = Enable
BIT 5
BIAS HI EN: Enables/disables active interrupts on the FETG pin due to BIAS fast comparisons above
the threshold limit.
0 = Disable. (Default)
1 = Enable
BIT 4
BIAS MAX EN: Enables/disables active interrupts on the FETG pin due to BIAS fast comparison s
below the threshold limit.
0 = Disable (Default)
1 = Enable
BITS 3:0 RESERVED (Default = 0)
PON Triplexer and SFP Controller
______________________________________________________________________________________ 75