Owner's manual

DS1874
SFP+ Controller with Digital LDD Interface
62 ______________________________________________________________________________________
Table 02h, Register 8Dh: RESERVED
FACTORY DEFAULT 00h
READ ACCESS PW2 or (PW1 and RWTBL246) or (PW1 and RTBL246)
WRITE ACCESS PW2 or (PW1 and RWTBL246)
MEMORY TYPE Nonvolatile (SEE)
This register is reserved.
FACTORY DEFAULT 00h
READ ACCESS PW2 or (PW1 and RWTBL246) or (PW1 and RTBL246)
WRITE ACCESS PW2 or (PW1 and RWTBL246)
MEMORY TYPE Nonvolatile (SEE)
8Eh RESERVED MON1
2
MON1
1
MON1
0
RESERVED MON2
2
MON2
1
MON2
0
BIT 7 BIT 0
Allows for right-shifting the final answer of MON1 and MON2 voltage measurements. This allows for scaling the
measurements to the smallest full-scale voltage and then right-shifting the final result so the reading is weighted
to the correct LSB.
FACTORY DEFAULT 30h
READ ACCESS PW2 or (PW1 and RWTBL246) or (PW1 and RTBL246)
WRITE ACCESS PW2 or (PW1 and RWTBL246)
MEMORY TYPE Nonvolatile (SEE)
8Fh RESERVED MON3
2
MON3
1
MON3
0
RESERVED MON4
2
MON4
1
MON4
0
BIT 7 BIT 0
Allows for right-shifting the final answer of MON3 and MON4 voltage measurements. This allows for scaling the
measurements to the smallest full-scale voltage and then right-shifting the final result so the reading is weighted
to the correct LSB. The MON3 right-shifting is only available for the fine mode of operation. The coarse mode does
not right-shift.
Table 02h, Register 8Eh: RIGHT-SHIFT
1
(RSHIFT
1
)
Table 02h, Register 8Fh: RIGHT-SHIFT
0
(RSHIFT
0
)