Owner's manual

20
5440A–IMAGE–10/05
ATMOS -2M60/2M30 [Preliminary]
7.2 Camera Link Connector
Standard Camera Link cable shall be used to ensure the full electrical compatibility.
• Camera connector type: MDR-26 (female) ref. 3M 10226-2210VE
• We recommend to use a Camera Link standard shielded cable as 3M 14X26-SZLB-XXX-0LC
Figure 7-2. Camera Link Pinout
7.3 TTL I/O
Camera connector type: Hirose HR10A-7R-5SB (female)
Cable connector type: Hirose HR10A-7P-5P (male)
Figure 7-3. TTL/IO Pinout
Command and Control Connector : J02
Signal Pin Signal Pin
GND 1 GND 14
X0- 2 X0+ 15
X1- 3 X1+ 16
X2- 4 X2+ 17
Xclk- 5 Xclk+ 18
X3- 6 X3+ 19
SerTC+ 7 SerTC- 20
SerTFG- 8 SerTFG+ 21
CC1- 9 CC1+ 22
CC2+ 10 CC2- 23
CC3- 11 CC3+ 24
CC4+ 12 CC4- 25
GND 13 GND 26
TTL IO Connector : J03
Signal Pin Signal Pin
TRIGGER 1 GND 4
GND 2 NC 5
SHUTTER 3
1
2
3
5
4
Receptacle Viewed from Camera Back