User Manual

2
5429B–IMAGE–04/05
ATMOS -1M60/1M30 [Preliminary]
1. Typical Performances
Measured with light source 3200°K and IR filter
Warning:
1. When exposed to such illumination level the sensor might lock-up and should be reset
See Register Software Reset @ 206H, Internal Register Mapping on page 17
Table 1-1. Camera Typical Performances
Sensor Characteristics at Maximum Pixel Rate
1M60 1M30 Unit
Resolution H × V 1312 × 1024 1312 × 1024 Pixels
Pixel size (square) 5 × 5 5 × 5 µm
Maximum frame rate 48 24 Hz
Pixel rate 75 37.5 MHz
Camera Performances
Bit depth 8, 10 or 12 Bits
Spectral range 350–1000 nm
Linearity ±2% in 5% and 95% of FSR
PRNU 1.5% rms
FPN 0.1% rms
Responsivity 10000
(1)
LSB/(Lux.s)
Output RMS Noise
Dynamic range
< 2.7 LSB rms
> 63
dB
Conversion factor 10 e-/ LSB
Dark Current 1500 e-/s
Over Illumination Behavior 75 Esat
(2)
Mechanical and Electrical Interface
Size (w × h × l) 44 × 44 × 45 mm
Weight 115 g
Lens Mount C-mount
Sensor Alignment
∆x, y = ± 250
∆z = ±150
∆0
xy
= ± 0.7
∆tilt
z
= 0-200
µm
µm
degree
µm
Power supply single 12 to 24 VDC
Power consumption < 2 W
Operating temperature 0 to 55 (non-condensing) °C
Storage temperature -40 to 70 (non-condensing) °C