User Manual

1
Features
High-performance, Low-power AVR
®
8-bit Microcontroller
Advanced RISC Architecture
130 Powerful Instructions – Most Single-clock Cycle Execution
32 x 8 General Purpose Working Registers
Fully Static Operation
Up to 16 MIPS Throughput at 16 MHz
On-chip 2-cycle Multiplier
Nonvolatile Program and Data Memories
8K bytes of In-System Self-Programmable Flash
Endurance: 1,000 Write/Erase Cycles
Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
512 Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
1K Byte Internal SRAM
Programming Lock for Software Security
Peripheral Features
Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode
One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
Real Time Counter with Separate Oscillator
Three PWM Channels
8-channel ADC in TQFP and MLF package
6 Channels 10-bit Accuracy
2 Channels 8-bit Accuracy
6-channel ADC in PDIP package
4 Channels 10-bit Accuracy
2 Channels 8-bit Accuracy
Byte-oriented 2-wire Serial Interface
Programmable Serial USART
Master/Slave SPI Serial Interface
Programmable Watchdog Timer with Separate On-chip Oscillator
On-chip Analog Comparator
Special Microcontroller Features
Power-on Reset and Programmable Brown-out Detection
Internal Calibrated RC Oscillator
External and Internal Interrupt Sources
Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down and
Standby
I/O and Packages
23 Programmable I/O Lines
28-lead PDIP, 32-lead TQFP, and 32-pad MLF
Operating Voltages
2.7 - 5.5V (ATmega8L)
4.5 - 5.5V (ATmega8)
Speed Grades
0 - 8 MHz (ATmega8L)
0 - 16 MHz (ATmega8)
Power Consumption
Active: TBD
Idle Mode: TBD
Power-down Mode: TBD
Rev. 2486AS - 08/01
8-bit
Microcontroller
with 8K Bytes
In-System
Programmable
Flash
ATmega8
ATmega8L
Advance
Information
Summary
N
o
t
e:
Thi
s
i
s a summary
d
ocum e n
t
.
A
comp
l
e
t
e
d
ocumen
t
i
s
ava ila ble on ou r web site at www.atmel.com.

Summary of content (15 pages)