Manual

4986F–AUTO–07/08

ATA6622/ATA6624/ATA6626

11. Revision History

Please note that the following page numbers referred to in this section refer to the specific revision

mentioned, not to this document.

Revision No. History

4986F-AUTO-05/08

• Section 3.15 “INH Output Pin” on page 6 changed

• Section 5.5 “Fail-safe Features” on page 13 changed

• Section 6.1 “Typical Timing Sequence with R

WD_OSC

= 51 kΩ” on page 15

changed

• Section 8 “Electrical Characteristics” numbers 1.6 to 1.8 on page 18

changed

4986E-AUTO-02/08

• Figure 2-1 on page 3 renamed

• Figure 6-1 “Timing Sequence with R

WD_OSC

= 51 kΩ” on page 16

changed

• Figure 8-3 “Application Circuit with External NPN” on page 26 added

4986D-AUTO-10/07 • Section 9 “Ordering Information” on page 26 changed

4986C-AUTO-09/07

• Features changed

• Sections 4.2, 4.3, 4.4 and 4.5 changed

• Figures 4-2, 4-3, 4-4, 5-1, 5-2, 5-3, 5-6, 6-1 and 6-2 changed

• Section 7 “Absolute Maximum Ratings” changed”

• Section 8 “Electrical Characteristics”: numbers 17.9 and 18.9 changed

4986B-AUTO-06/07

• Put datasheet into a new template

• Part number ATA6626 added

• Features changed

• Description text changed

• Figure 1-1 “Block Diagram” changed

• Figure 2-1 “Pinning SO8 changed”

• Figure 4-3 “LIN Wake Up from Silent Mode” changed

• Figure 4-5 “LIN Wake Up from Sleep Mode” changed

• Sections 3.2, 3.4, 3.7, 3.8, 3.9, 3.10, 3.11, 3.12, 3.13 and 3.14 changed

• Sections 4.2, 4.3, 4.4, 4.5, 5.1, 5.2, 5.3, 5.5, 5.6, 6.1 and 6.2 changed

• Section 8 “Electrical Characteristics”: numbers 1.3, 3.5, 8.4, 12.1, 15.5,

17.9, 18 and 18.9 changed

• Figure 8-2 “Application Circuit” changed

• Section 9 “Ordering Information” changed

• Section 10 “Package Information” changed