Manual

6 13.56 MHz Type B RF Reader
8547A−RFID−10/08
5. Register Summary
The AT88RF1354 Command Reference Guide document contains all of the detailed information required by a
software developer or embedded systems programmer to use the AT88RF1354 Register Set. See www.atmel.com
for the AT88RF1354 Command Reference Guide (doc 5150x).
Table 2. Register set sorted by address.
Register
Name
Register
Address
Description Register Type
CPR0_L $00 (Default) Communication Protocol Register 0 - Low Byte Read-only
CPR0_H $01 (Default) Communication Protocol Register 0 - High Byte Read-only
CPR1_L $02 Communication Protocol Register 1 - Low Byte [RFU] Read / Write
CPR1_H $03 Communication Protocol Register 1 - High Byte Read / Write
CPR2_L $04 Communication Protocol Register 2 - Low Byte [RFU] Read / Write
CPR2_H $05 Communication Protocol Register 2 - High Byte Read / Write
CPR3_L $06 Communication Protocol Register 3 - Low Byte [RFU] Read / Write
CPR3_H $07 Communication Protocol Register 3 - High Byte Read / Write
CPR4_L $08 Communication Protocol Register 4 - Low Byte [RFU] Read / Write
CPR4_H $09 Communication Protocol Register 4 - High Byte Read / Write
SREG $0A Status Register Read-only
EREG $0B Error Register Read-only
IDR $0C Hardware ID Register Read-only
PLL $0D PLL Output Configuration Register Read / Write
TXC $0E Transmitter Register Read / Write
RXC $0F Receiver Register Read / Write
All other register address values are not supported