Owner's manual

49
3500O–DFLASH–11/2012
AT45DB161D
28. Revision History
Doc. Rev. Date Comments
3500O 11/2012 Update to Adesto Technologies.
3500N 05/2010
Changed t
SE
(Typ) 1.6 to 0.7 and (Max) 5 to 1.3
Changed t
CE
(Typ) TBD to 12 and (Max) TBD to 25
Changed from 10,000 to 20,000 cumulative page erase/program operations and added the
please contact Adesto statement in section 11.3
3500M 04/2009
Updated Absolute Maximum Ratings
Added 24C1 24 Ball BGA package Option
Deleted DataFlash Card Package Option
Removed Chip Erase Errata
3500L 03/2009
Changed Deep Power-Down Current values
- Increased typical value from 5µA to 15µA
- Increased maximum value from 15µA to 25µA
3500K 02/2009 Changed t
DIS
(Typ and Max) to 27ns and 35ns, respectively
3500J 04/2008
Added part number ordering code details for suffixes SL954/955
Added ordering code details
3500I 08/2007
Added additional text to “power of 2” binary page size option
Removed SER/
BYTE statement from SI and SO pin descriptions in Table 2-1
Changed t
VSCL
from 50µs to 70µs
Changed t
XFR
and t
COMP
values from 400µs to 200µs
Changed t
RDPD
from 30µs to 35µs
3500H 08/2006 Added t
SCKR
and t
SCKF
parameters to Table 18-4
3500G 08/2006 Added errata regarding Chip Erase
3500F 07/2006 Corrected typographical errors
3500E 05/2006
Added Legacy Status Register Read opcode 57H. This opcode is supported on devices with date
code 0636 and later
3500D 02/2006 Changed part 2 of the device ID to 00H
3500C 01/2006
Added text, in “Programming the Configuration Register”, to indicate that power cycling is
required to switch to “power of 2” page size after the opcode enable has been executed
Added “Legacy Commands” table
3500B 11/2005
Added 2.5V - 3.6V operating range
Changed t
VCSL
from 30µs to 50µs min
Changed t
PUW
from 10ms to 20ms max
Changed t
DIS
from 8ns to 6ns max (2.7V device)
Changed t
V
from 8ns to 6ns max (2.7V device)
3500A 09/2005 Initial Document Release