Owner's manual

FLYFOT-M260-MODULE
Page: 184 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Note : Half Rate available.
AT+WVR=? +WVR: (0,1)
Note : If EFR available.
AT+WVR=?
+WVR: (0)
Note : If HR and EFR not available
AT+WVR=? +WVR: (0-5)
Note : If HR and EFR available
AT+WVR? +WVR: <n>
Command Possible responses
AT+WVR=1 OK
Note : Configure voice type FR and EFR Note : Bearer is configured
AT+WVR=6 +CME ERROR: 3
Note : Syntax error
Syntax error
AT+WVR? +WVR: 1
Note : Ask for the current value OK
18.14.3 Defined values :
<n> : Voice coding type.
0: FR
1: FR and EFR
2: FR, HR with HR preferred
3: HR, FR with FR preferred
4: EFR,HR with HR preferred
5: HR,EFR with EFR preferred.
18.15 Data Rate +WDR
18.15.1 Description :
This specific command allows the data rate for bearer data to be configured (available for outgoing
calls only).
18.15.2 Syntax :
Command syntax : AT+WDR=<n>
Command Syntax Return
AT+WDR=<n> OK
AT+WDR=? +WDR: (0-2)
Note : If Half Rate available.
AT+WDR=? +WDR: (0)