MSDS
12/19/2013Revision:
11/20/2014Printed:
Page: 3
Rain-X Wood Protectors
SAFETY DATA SHEET
07/03/2013Supersedes Revision:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Avoid breathing of vapors or mist. Avoid contact with eyes and skin.
A source of clean water should be available in or near the work area for flushing of the
eyes and skin if contact occurs.
Precautions To Be Taken in
Handling:
Store in a cool place in original container and protect from freezing. Do not store near
flames or at elevated temperatures.
Keep container tightly closed when not in use.
Precautions To Be Taken in
Storing:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
When used as directed, respiratory equipment should not be needed.
Wear NIOSH approved respiratory protective equipment when vapor or mists may
exceed applicable concentration limits.
Respiratory Equipment
(Specify Type):
Safety glasses should be worn during normal handling of this material.
Where contact with the eyes or face is likely, a faceshield or chemical splash goggles
should be worn to prevent eye contact.
Eye Protection:
Wear gloves with as much resistance to the chemical ingredients as possible. Glove
materials such as nitrile rubber will provide protection. Glove selection should be based
on chemicals being used and conditions of use. Consult your glove supplier for
additional information. Gloves contaminated with product should be discarded and not
reused.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, coveralls, etc., to minimize exposure to the skin, eyes, and
clothing.
Other Protective Clothing:
Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
Use only with adequate ventilation to prevent buildup of vapors. Do not use in areas
where vapors can accumulate and concentrate, such as basements, bathrooms or small
enclosed areas. Whenever possible, use outdoors in an open air area. If using indoors
open all windows and doors and maintain a cross ventilation of moving fresh air across
the work area. If strong odor is noticed or you experience slight dizziness, headache,
nausea or eye-watering -- STOP -- ventilation is inadequate. Leave area immediately
and move to fresh air.
Engineering Controls
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, or smoking.
Do not eat, drink, or smoke in the work area.
Work/Hygienic/Maintenance
Practices:
Licensed to W.M. Barr and Company
GHS format