User manual

Rain Master Irrigation Systems Weather Center II User Manual
Page 21
Figure 14 - Weather Center Evolution DX2 Controller
Step 5 Plug the 12 VDC power supply (EV-PS) into the
Evolution DX2 Controller’s internal AC receptacle.
Step 6 Connect the red and black wires of the Weather Center
cable (417-0059) from the Weather Computer terminal
block to the DX2 terminal strip. (See Figure 11 -
Evolution DX2 Wiring Detail).
Step 7 Turn on power to the Evolution DX2 Controller using the
AC power switch.
Step 8 Secure the Weather Center Tower access cover as
necessary. This completes the Weather Center
installation.
2.2 RME Eagle Controller Wiring
Step 1 Turn off power to the RME Eagle Controller using the AC
power switch.
Step 2 Connect the remaining ends of the EV-CAB-WS12 (12