User manual

Weather Center II User Manual Rain Master Irrigation Systems
Page 8
User Supplied 3/8, 5/16, 7/16 inch socket
wrench
1
User Supplied
Screwdriver, flat blade
1
User Supplied
8 foot step ladder
1
User Supplied PVC Conduit 1 inch, for tower
base wiring.
4 feet
User Supplied
PVC 1 inch elbow
1
Table 5 - Required Site Materials
Part Number Description Quantity
User Supplied
Concrete and masonry Sand
1
User Supplied
Standard masonry tools
1
Table 6 - Replacement Parts List
Part Number Description
Component
Type
650-0005 Replacement Screen Tipping Bucket Rain
651-0011 Anemometer Wind Cup Assembly Wind
EV-WETHR-
CMPTR
Weather Center II Computer ET
650-0011 Solar Radiation Sensor Assembly ET
650-0010
Relative Humidity/Temperature Sensor
Assembly
ET
651-0009 Anemometer Bearing ET/Wind
1.2 General Information
The mounting bolts for the Rain Gauge, Wind Sensor and tower
mounting bracket, are pre-installed on the tower mast. These bolts will
need to be removed prior to assembly and installation.