Installation Guide

ManualsBrandsRain Harvesting ManualsEater AdvancedRain Harvesting RHAD01 Leaf Eater Advanced

Code

Size

Country

RHAD01

RHAD02

RHAD05

RHAD06

90mm

100mm

100x50mm

100x75mm

Australia

RHAD90

RHAD100

2x3"/3x4"

3"/4"

USA

RHAD200

80/100mm

New Zealand

RHAD302

100mm

South Africa

RHAD502

68mm/110mm

RHAD602

75/105/110mm

Europe

RHAD02

110mm

India

Leaf Eater Advanced

PRODUCT DETAILS

The compact size of the Leaf Eater Advanced

allows it to squeeze into small spaces. Its

swivelling base allows even more installation

flexibility, allowing you to mount it easily to

horizontal or vertical pipes.

Like all rain heads, it improves your water quality

by filtering out leaves and debris with it's fine,

mesh screen.

Installation and Specification Guide

rainharvesting.com

Summary of content (8 pages)

PAGE 1
Leaf Eater Advanced Installation and Specification Guide PRODUCT DETAILS The compact size of the Leaf Eater Advanced allows it to squeeze into small spaces. Its swivelling base allows even more installation flexibility, allowing you to mount it easily to horizontal or vertical pipes. Like all rain heads, it improves your water quality by filtering out leaves and debris with it's fine, mesh screen. rainharvesting.
PAGE 2
Installation WHAT'S IN THE BOX? Leaf Eater Advanced TOOLS/MATERIALS YOU MAY REQUIRE Tape measure Marker pen Saw Screws Screwdriver or drill Solvent cement glue NOTE 1: Ensure a suitable gap 20mm-50mm is placed between the open end of your downpipe and screen of your rain head, to allow debris to escape the flow of water. This can vary depending on the type/size of leaf matter and debris you experience in your gutter.
PAGE 3
GUTTER MOUNT (HORIZONTAL) 1 - Locate the position at which you will be installing your Leaf Eater Advanced rain head. Whether this is directly under your gutter/eave or midway down your downpipe, it should be a minimum of 500mm above your tank inlet and tank overflow pipe. 2 - Remove the Clean Shield™ screen by lifting it up and then out (FIGURE 2). 3 - Swivel the outlet to the horizontal position. Some force may be required.
PAGE 4
Figure 1 Suggested Installation Orientations
PAGE 5
Product Specifications Leaf Eater Advanced rainharvesting.
PAGE 6
Product Specifications Leaf Eater Advanced Country Code A B C D E F G RHAD01 90 F 214 242 193 243 163 167 RHAD02 100 F 214 242 193 243 163 167 RHAD05 100 x 50 F 214 289 193 243 210 167 RHAD06 100 x 75 F 214 290 193 243 211 167 2" x 3" F 8.42" 10.89" 7.59" 10.94" 7.8" 6.57" 3" x 4" F 8.42" 10.89" 7.59" 10.94" 7.8" 6.57" 3" SDR 35 F 8.42" 10.71" 7.59" 10.94" 7.59" 6.57" 3" SCH 40 F 8.42" 10.63" 7.59" 10.94" 7.48" 6.57" 4" SDR 35 F 8.
PAGE 7
Maintenance Your rain head’s Clean Shield™ screen is mostly self-cleaning. If cleaning is required, simply take hold of the quick release tabs and pull the Clean Shield™ screen upwards and outwards, then hose or brush off before reinserting the screen. A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
PAGE 8
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.