Installation Guide

ManualsBrandsRain Harvesting ManualsHood UpgradeRain Harvesting RHAC11 Hood Upgrade

Code

Country

RHAC11

Global

Hood Upgrade

PRODUCT DETAILS

Upgrade your rain head with The Hood and

capture more rainwater by eliminating

splashing from the mesh screen with its cover.

The protective cover eliminates any splashing -

which ensures you collect 100% of the water

flowing through your downpipe, and prevents

leaves from falling onto the area below.

Installation and Specification Guide

rainharvesting.com

for Leaf Eater Commercial (PP)

Summary of content (6 pages)

PAGE 1
Hood Upgrade for Leaf Eater Commercial (PP) Installation and Specification Guide PRODUCT DETAILS Upgrade your rain head with The Hood and capture more rainwater by eliminating splashing from the mesh screen with its cover. The protective cover eliminates any splashing which ensures you collect 100% of the water flowing through your downpipe, and prevents leaves from falling onto the area below. rainharvesting.
PAGE 2
Installation WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE Leaf Eater Commercial Screen Tape measure Leaf Eater Commercial Hood Marker pen Screws Saw Pipe Brackets Screws for mounting Screwdriver or drill INSTALLATION 1 - Undo the screws to remove and discard your existing Leaf Eater Commercial rain head screen. 2 - Attach The Hood screen to the Leaf Eater Commercial rain head body, making sure the screen is fully seated all the way around the body.
PAGE 3
HOW IT WORKS rainharvesting.
PAGE 4
Product Specifications Hood Upgrade for Leaf Eater Commercial (PP) Country Code Global RHAC11 A B C 367 349 362 14.4" 13.7" 14.3" All dimensions are in mm unless otherwise stated. rainharvesting.
PAGE 5
Maintenance 1 - Slide The Hood cover up your inlet pipe and undo the screws to remove The Hood screen. 2 - With the screen removed, either brush off or wash the debris from the screen. 3 - Reinsert the screen into the Leaf Eater Commercial body, making sure it is fully seated all the way around and flush with the body. Secure the screen to the body using the screws. 4 - Reinstall the cover, making sure that the skirt around the edge is fully seated in the corresponding channel on the screen.
PAGE 6
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.