Installation Guide

ManualsBrandsRain Harvesting ManualsHood UpgradeRAIN HARVESTING RHAC10 Hood Upgrade for Leaf Eater Advanced

Code

Country

RHAC10

Global

Hood Upgrade

PRODUCT DETAILS

If your rain head is splashing water or leaves,

upgrade your rain head with The Hood.

The protective cover eliminates any splashing

- which ensures you collect 100% of the water

flowing through your downpipe, and prevents

leaves from falling onto the area below.

Installation and Specification Guide

rainharvesting.com

for Leaf Eater Advanced

Summary of content (6 pages)

PAGE 1
Hood Upgrade for Leaf Eater Advanced Installation and Specification Guide PRODUCT DETAILS Code Country RHAC10 Global If your rain head is splashing water or leaves, upgrade your rain head with The Hood. The protective cover eliminates any splashing - which ensures you collect 100% of the water flowing through your downpipe, and prevents leaves from falling onto the area below. rainharvesting.
PAGE 2
Installation WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE The Hood Upgrade Cover Tape measure The Hood Upgrade Screen Marker pen Saw Screws Screwdriver or drill Solvent cement glue HOW IT WORKS rainharvesting.
PAGE 3
THE HOOD UPGRADE INSTALLATION 1 - Remove and discard your Leaf Eater Advanced screen. 2 - Attach The Hood screen to the Leaf Eater Advanced body, making sure the screen is fully seated all the way around and flush with the body. 3 - Ensure your inlet pipe is cut to sit at least 20mm below the top surface of The Hood cover. 4 - If your inlet pipe is 100mm or 4”, you will need to cut away the multi fit inlet so your inlet pipe can fit inside.
PAGE 4
Product Specifications Hood Upgrade for Leaf Eater Advanced Country Code Global RHAC10 A B C 194 148 161 7.6" 5.8" 6.3" All dimensions are in mm unless otherwise stated. rainharvesting.
PAGE 5
Maintenance 1 - Slide The Hood cover up your inlet pipe and remove The Hood screen. 2 - With the screen removed, either brush off or wash the debris from the screen. 3 - Reinsert the screen to the Leaf eater Advanced body, making sure the screen is fully seated all the way around and flush with the body. 4 - Reinstall the cover, making sure that the skirt around the edge is fully seated in the corresponding channel on the screen.
PAGE 6
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.