Installation Guide

ManualsBrandsRain Harvesting ManualsTotal RainRAIN HARVESTING DDTR10 90mm Total Rain Ultimate All In One Rainwater Cleaning Device

Total Rain

PRODUCT DETAILS

The ultimate all-in-one rainwater cleaning

device to give you the best quality water.

Total Rain filters leaves from your downpipes

and diverts the first flush in one product. It

diverts the first 20L / 5 Gal and is perfect for

medium catchment areas with low to

moderate pollution.

Installation and Specification Guide

rainharvesting.com

Code

Size

Country

DDTR10

90mm

Australia

DDTR110

USA

DDTR210

80mm

New Zealand

DDTR310

80mm

South Africa

DDTR410

90mm

India

DDTR510

68mm

Summary of content (7 pages)

PAGE 1
Total Rain Installation and Specification Guide PRODUCT DETAILS The ultimate all-in-one rainwater cleaning device to give you the best quality water. Total Rain filters leaves from your downpipes and diverts the first flush in one product. It diverts the first 20L / 5 Gal and is perfect for medium catchment areas with low to moderate pollution. rainharvesting.
PAGE 2
Installation TOOLS/MATERIALS YOU MAY REQUIRE WHAT'S IN THE BOX? Leaf Eater Stream rain head Tape measure 90mm Tee Marker pen Carrot First Flush Diverter Chamber Saw Carrot Upper Collar with O ring Solvent weld glue Carrot Lower Coupling Screws Pipe Wall Brackets x 2 Drill or screwdriver Adaptors (DDTR110, DDTR210, DDTR310 & DDTR510 versions) HOW IT WORKS BEFORE CARROT IS ACTIVATED The Total Rain is an all-in-one solution which combines the sleek design of the Leaf Eater Stream rain head with
PAGE 3
TOTAL RAIN 90MM 1 - Determine the installation position for your Total Rain. This may be directly under your gutter/ eave or mid-way down your vertical downpipes. Wherever you choose to install it, your Total Rain screen must be a minimum of 500mm above your tank inlet and tank overflow pipe. Note that you should install your Total Rain in a location where you can access it easily for occasional maintenance. 2 - Select the orientation of the tee appropriate for your chosen installation point.
PAGE 4
PART REFERENCE CHART 1 In-feed from the roof 11 Carrot Filler Frame 2 To the tank 12 Carrot Seal 3 Leaf Eater Stream Original rain head 13 Carrot 4 90mm tee 14 Draining Wick with Grommet 5 90mm Carrot Upper Collar with O-Ring 15 Wick Blanking Grommet 6 Carrot housing 16 Carrot Spring 17 Draining Grommets 7 90mm Carrot Lower Slip Coupling 8 To stormwater 9 Carrot Flow Diffuser 10 Filling Grommet rainharvesting.
PAGE 5
Product Specifications Total Rain Country Code A B C D DDTR10 90 F 795 153 136 DDTR30 100 F 900 186 159 DDTR110 3" F 31.75" 6.01" 5.46" DDTR 130 4" F 36.61" 7.32" 6.26" New Zealand DDTR210 80 F 830 153 161 South Africa DDTR310 80 F 830 153 161 UK DDTR510 68 F 838 153 157 DDTR610 75 F 840 153 159 DDTR630 105 F 921 186 180 Australia USA EU rainharvesting.
PAGE 6
Maintenance It is important to periodically unscrew the Carrot Diverter Chamber and check the unit is functioning properly. Check that the outlet grommet has not become blocked. Also check that the spring is functioning correctly and all the internal seals are seated properly. To clean your Leaf Eater Stream Original, simply slide the cover up your inlet pipe to access the mesh screen.
PAGE 7
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.