Installation Guide

ManualsBrandsRain Harvesting ManualsDiverter RectangularRAIN HARVESTING DDIV102 Quickfit Diverter Rectangular

Code

Size

Country

DDIV102

2" x 3"

USA

Quickfit Diverter

Rectangular

PRODUCT DETAILS

The quickest way to start collecting water

from your rectangular downpipes.

It's as simple as making a hole in your pipe

and then pressing the diverter inside. Then

just connect it to your barrel and you're

done!

Installation and Specification Guide

rainharvesting.com

Summary of content (6 pages)

PAGE 1
Quickfit Diverter Rectangular Installation and Specification Guide PRODUCT DETAILS The quickest way to start collecting water from your rectangular downpipes. It's as simple as making a hole in your pipe and then pressing the diverter inside. Then just connect it to your barrel and you're done! rainharvesting.
PAGE 2
Installation WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE Quickfit Diverter valve Tape measure Quickfit Diverter rectangular rubber Marker pen collector Drill 1/2” (12mm) garden hose fitting and seal Utility knife 1 1/4” (32mm) hose fitting and seal Spirit level Screws x 2 Liquid soap Hole saw 1 3/8” (35mm) HOW IT WORKS 1 - Determine and mark the position you would like to install your Diverter. Point the outlet in the direction you intend to route the hose.
PAGE 3
INSTALLATION 3- Compress the rubber collector and push it through the hole, ensuring that it is oriented correctly to collect water. There is an indicator on the front of the collector to show the right way up. Using liquid soap to lubricate the rubber collector will make it easier to insert into the downpipe. 4 - Press the Quickfit Diverter onto the rubber collector. The mounting holes on the Quickfit Diverter body will align with the holes on the rubber collector.
PAGE 4
Product Specifications Quickfit Diverter Rectangular Country Code Pipe Fitment A B C D E USA DDIV102 2" x 3" 3.01" 3.77" 4.02" 2.52" 1" BSP Male All dimensions are in mm unless otherwise stated. rainharvesting.
PAGE 5
Maintenance To keep your Quickfit Diverter performing at its best, ensure you install a rain head above the diverter to ensure that no leaves or debris can become lodged in your Quickfit Diverter. If you need to check your Quickfit Diverter, unscrew the diverter from your pipe. Use only a medium torque to ensure the screws don't strip out. Carefully remove the rubber collector from the pipe. Hose or brush out any debris, then simply refit your Quickfit Diverter.
PAGE 6
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.