Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsBuilding materialsVandlSystem 1-gal. VandlGuard Ten Non-Sacrificial Anti-Graffiti Coating

RECOMMENDED USES:

 Aggregate panels

 Concrete, brick, or stucco

 EFIS and cement plaster

 Metal

 Over water-based and solvent-based coatings

 Plastic

 Previously or newly-painted surfaces.

 Stone

 Wood

COVERAGE RATES (THEORETICAL):

Porous Surfaces Square

Feet

Per Coat Per Gallon

Precision Block 275

Split Face Block 275

Ground Face Block 275

Scored/Fluted Block 250

Sand Blasted Block 250

Slump/Adobe Block 275

Heavy Textured Stucco 250

Brick 300

Unpainted Wood 300

Porous Tile 275

Dense Surfaces

Per Coat

Fine/Medium Textured Stucco 250

Pre-Cast/Tilt-up Concrete 250

Cast Concrete 250

Sand Blasted Concrete 250

Exposed Aggregate 250

EFIS 275

Metal 300

Painted Surfaces 300

Warranty Period: Ten Years

CSI Reference: Division 9

Part Numbers: USA International

1 Gallon VG-7007 VG-7007-CA

5 Gallon VG-7006 VG-7006-CA

VANDLGUARD TEN

™

NON-SACRIFICIAL ANTI-GRAFFITI COATING

PRODUCT DESCRIPTION

VANDLGUARD TEN Non-Sacrificial Anti-Graffiti Coating is a three-coat

system, that requires two coats of VANDLGUARD TEN and one coat of

VANDLGUARD Finish Coat. This system provides a tough and durable graf-

fiti-resistant finish. This is a cross-linking co-polymer material coating

that dries clear (non-yellowing) with a low-luster sheen. Protects a vari-

ety of interior and exterior vertical surfaces from permanent graffiti

staining and damage. Will protect your surface from graffiti defacement

caused by commercial available spray paints.

Features and Benefits of VANDLGUARD TEN :

 A two-coat application of VANDLGUARD TEN and one coat of

VANDLGUARD Finish Coat is all that’s needed

 Backed by the best warranty available on the market

 Supplied ready to use—no mixing needed

 V.O.C. compliant—less then 20 g/l

 Treated surfaces will sustain unlimited graffiti removals for a period

up to ten years

 Will retard the growth of mildew, mold, fungus, or bacteria

 Surfaces require no particular maintenance. Damaged or abraded

areas are easily restored with an additional coat of VANDLGUARD

Finish Coat

 No expensive sand blasting needed

 Meets Master Painters institute (MPI) #105 - Graffiti-Protection,

Top Coat

A COMPLETE SYSTEM

Bare Surfaces: First apply one coat of

MICRO-SEAL Water-Repellent

by Rainguard (required for

applications that need warranties

and substrate is unpainted or sealed)

For applications that do not require material and labor warranties,

and only need material warranties please refer to VANDLGUARD™

Non-Sacrificial Graffiti Coating.

Summary of content (2 pages)

PAGE 1
VANDLGUARD TEN ™ Warranty Period: Ten Years NON-SACRIFICIAL ANTI-GRAFFITI COATING CSI Reference: Division 9 PRODUCT DESCRIPTION Part Numbers: 1 Gallon 5 Gallon VANDLGUARD TEN Non-Sacrificial Anti-Graffiti Coating is a three-coat system, that requires two coats of VANDLGUARD TEN and one coat of VANDLGUARD Finish Coat. This system provides a tough and durable graffiti-resistant finish. This is a cross-linking co-polymer material coating that dries clear (non-yellowing) with a low-luster sheen.
PAGE 2
HOW TO USE: GRAFFITI REMOVAL: All surfaces to be coated should be structurally sound, clean, and dry. In many instances, non-abrasive household cleaners safely and effectively remove tagging. However, in the event tagging can’t be removed with these cleaners, please contact manufacturer and purchase Rainguard VANDLCLEAN SUPER. Follow manufacturer’s recommendations and instructions for use. In addition, warm water power-washing has also been known to assist in the removal of tagging.