Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsBuilding materialsVandlSystem 5-gal. VandlGuard Five Non-Sacrificial Anti-Graffiti Coating

RECOMMENDED USES:

 Aggregate panels

 Concrete, brick, or stucco

 EFIS and cement plaster

 Metal

 Over water-based and solvent-based coatings

 Plastic

 Previously or newly-painted surfaces.

 Stone

 Wood

COVERAGE RATES (THEORETICAL):

Porous Surfaces Square Feet

One Coat Per Gallon

Precision Block 200

Split Face Block 200

Ground Face Block 200

Scored/Fluted Block 180

Sand Blasted Block 180

Slump/Adobe Block 200

Heavy Textured Stucco 200

Brick 225

Unpainted Wood 250

Porous Tile 200

Dense Surfaces

One Coat

Fine/Medium Textured Stucco 225

Pre-Cast/Tilt-up Concrete 225

Cast Concrete 225

Sand Blasted Concrete 200

Exposed Aggregate 200

EFIS 200

Metal 250

Painted Surfaces 250

Warranty Period: Five Years

CSI Reference: Division 9

Part Numbers: USA International

1 Gallon VG-7005 VG-7005-CA

5 Gallon VG-7004 VG-7004-CA

VANDLGUARD FIVE

™

NON-SACRIFICIAL ANTI-GRAFFITI COATING

PRODUCT DESCRIPTION

VANDLGUARD FIVE Non-Sacrificial Anti-Graffiti Coating is a two coat

system, that requires one coat of VANDLGUARD FIVE and one coat of

VANDLGUARD Finish Coat. This system provides a tough and durable graf-

fiti-resistant finish. This is a cross-linking co-polymer material coating

that dries clear (non-yellowing) with a low-luster sheen. Protects a vari-

ety of interior and exterior vertical surfaces from permanent graffiti

staining and damage. Will protect your surface from graffiti defacement

caused by commercially available spray paints.

Features and Benefits of VANDLGUARD FIVE:

 A single coat application of VANDLGUARD FIVE and one coat of

VANDLGUARD Finish Coat is all that’s needed

 Backed by the best warranty available on the market

 Supplied ready to use—no mixing needed

 V.O.C. compliant—less then 20 g/l

 Treated surfaces will sustain unlimited graffiti removals for a period

up to five years

 Will retard the growth of mildew, mold, fungus, and bacteria

 Surfaces require no particular maintenance. Damaged or abraded

areas are easily restored with an additional coat of VANDLGUARD

Finish Coat

 No expensive sand blasting needed

 Meets Master Painters institute (MPI) #105 - Graffiti-Protection,

Top Coat

A COMPLETE SYSTEM

Bare Surfaces: First apply one coat of

MICRO-SEAL Water-Repellent

by Rainguard (required for

applications that need warranties

and substrate is unpainted or sealed)

For applications that do not require material and labor warranties,

and only need material warranties please refer to VANDLGUARD™

Non-Sacrificial Graffiti Coating.

Summary of content (2 pages)

PAGE 1
VANDLGUARD FIVE ™ Warranty Period: Five Years NON-SACRIFICIAL ANTI-GRAFFITI COATING CSI Reference: Division 9 PRODUCT DESCRIPTION Part Numbers: 1 Gallon 5 Gallon VANDLGUARD FIVE Non-Sacrificial Anti-Graffiti Coating is a two coat system, that requires one coat of VANDLGUARD FIVE and one coat of VANDLGUARD Finish Coat. This system provides a tough and durable graffiti-resistant finish. This is a cross-linking co-polymer material coating that dries clear (non-yellowing) with a low-luster sheen.
PAGE 2
HOW TO USE: GRAFFITI REMOVAL: All surfaces to be coated should be structurally sound, clean, and dry. In many instances, non-abrasive household cleaners safely and effectively remove tagging. However, in the event tagging can’t be removed with these cleaners, please contact manufacturer and purchase Rainguard VANDLCLEAN SUPER. Follow manufacturer’s recommendations and instructions for use. In addition, warm water power-washing has also been known to assist in the removal of tagging.