Instructions / Assembly

ManualsBrandsRain Guard ManualsBuilding materials16 oz. Hydro-Lok Liquid Repelling Treatment

RECOMMENDED USES:

 Work Boots

 Gloves

 Tents

 Patio Furniture

 Driveways

 Wood

 Leather

 Metal Surfaces

 Concrete

 Canvas

 Masonry block

 Stucco

 Porous stone

 Unglazed tile

 Aluminum

COVERAGE RATES (THEORETICAL):

All Substrates___ Sq Ft/ bottle

First Coat 20

Second Coat 40

Special Considerations:

 Porous surfaces that allow water penetration will re-

quire two coats. If a surface darkens when sprinkled

with water, two coats are recommended. .

USA International

Part Numbers:

oz. bottle

TPC-1000 TPC-1000CA

HYDRO-LOK

™

ALL SURFACE WATER REPELLENT

with MICRO-LOKTM

PRODUCT DESCRIPTION

Rainguard HYDRO-LOK is a single component nano-based super

hydrophobic treatment that creates a moisture barrier on almost

any surface. HYDRO-LOK does not contain any harmful solvents

and is not flammable either in liquid or dried form. HYDRO-LOK

is completely clear when dry and does not create a dark, hazy or

frosted appearance. It is packaged in an easy to use trigger spray

bottle, not a pressurized aerosol can. HYDRO-LOK creates a

clear, deep-penetrating, and non-film-forming chemically-reactive

water repellent that contains no silicone oils, paraffin wax, or ure-

thanes.

HYDRO-LOK contains MICRO-LOK which creates a micro-molecular

chemical and mechanical bond between the water-repellent

chemicals and the substrate. HYDRO-LOK penetrates deep into

porous masonry surfaces to provide long-lasting and virtually in-

destructible water-repellent protection that is not affected by

weather or sunlight. .

HYDRO-LOK provides superior grade, water-repellent perfor-

mance on a wide variety of vertical surfaces. This material is

Ready To Use - Do Not Dilute.

PRODUCT FEATURES

 Mold and Mildew Inhibitor

 Protection not effected by weathering or UV light

 V.O.C. compliant

 Contains no known carcinogens

 Does not darken surfaces

 Breathable – does not trap moisture

 Can be used in cold temperature applications

 Will not yellow

Summary of content (2 pages)

PAGE 1
HYDRO-LOK™ ALL SURFACE WATER REPELLENT with MICRO-LOKTM Part Numbers: 16 oz. bottle USA TPC-1000 International TPC-1000CA PRODUCT DESCRIPTION Rainguard HYDRO-LOK is a single component nano-based super hydrophobic treatment that creates a moisture barrier on almost any surface. HYDRO-LOK does not contain any harmful solvents and is not flammable either in liquid or dried form. HYDRO-LOK is completely clear when dry and does not create a dark, hazy or frosted appearance.
PAGE 2
PRECAUTIONS & LIMITATIONS All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. DO NOT DILUTE. HYDRO-LOK IS SUPPLIED READY TO USE. Do not apply to surfaces if moisture content is greater than 22% as measured with an electronic moisture meter. Do not apply materials in climates where freezing temperatures have existed prior to application. Allow adequate time for surfaces to thaw.