Instructions / Assembly

ManualsBrandsRain Guard ManualsBuilding materialsClear-Seal 5-gal. Surface Low Gloss Urethane Sealer

Rainguard

Clear-Seal Acrylic

Clear-Seal

™

Acrylic

Urethane

technical data sheet

100% Urethane Water Repellent

Page 1 of 3Customer Service Help-Line 800.272.4647 RainguardPro.com

Description

Rainguard Clear-Seal Acrylic Urethane Sealer is

a single-component, self cross linking urethane/

acrylic sealer and nish coat for decorative

concrete, stone, and other masonry surfaces

Clear-Seal, a waterbased, low VOC, low odor

coating can protect your masonry against

chemical spills and staining agents, UV light, and

wear due to heavy foot and tire trafc.

Clear-Seal is formulated for use on horizontal or

vertical painted or unpainted concrete and wood

surfaces. It may be used as a clear sealer

on commercial, warehouse, or industrial oors,

residential or commercial garage spaces, brick

pavers, or other masonry surfaces.

Features

• Impact and wear resistant

• Resists hot tire pick-up

• Non-yellowing formulation

• Resistant to stains, acids, bases, gasoline,

alcohol and oil (vegetable and motor)

• Low odor

• Non-hazardous

• Resists UV rays

• Environmentally-friendly

• Water clean-up

• Excellent adhesion

• Fast dry time and cure time

Recommended Uses

• Brick

• Concrete

• EFIS or Cement Plaster

• Masonry Block

• Stucco

• Wood

• Clear protection on murals and painted

vertical surfaces

• Repellent of oil, gas, and other uids

Coverage Rates* (Theoretical)

*Extremely porous surfaces may require multiple coats

Substrate Sq Ft / Gallon

Porous Surface 200-300

Dense Surface 100-150

Description U/M Code

Clear-Seal Acrylic High Gloss 1 Gallon CU-0101

Urethane Quick Cure 2 Ounce SP-1300

Clear-Seal Acrylic High Gloss 5 Gallon CU-0105

Urethane Quick Cure 10 Ounce SP-1305

Clear-Seal Acrylic Low Gloss 1 Gallon CU-0201

Urethane Quick Cure 2 Ounce SP-1300

Clear-Seal Acrylic Low Gloss 5 Gallon CU-0205

Urethane Quick Cure 10 Ounce SP-1305

Summary of content (3 pages)

PAGE 1
Clear-Seal™ Acrylic Urethane technical data sheet 100% Urethane Water Repellent U/M Code Clear-Seal Acrylic High Gloss 1 Gallon CU-0101 Urethane Quick Cure 2 Ounce SP-1300 Clear-Seal Acrylic High Gloss 5 Gallon CU-0105 10 Ounce SP-1305 Clear-Seal Acrylic Low Gloss 1 Gallon CU-0201 Urethane Quick Cure 2 Ounce SP-1300 Clear-Seal Acrylic Low Gloss 5 Gallon CU-0205 10 Ounce SP-1305 Urethane Quick Cure Urethane Quick Cure Description Rainguard Clear-Seal Acrylic Urethane Sealer is a
PAGE 2
Application Warranty The information contained herein is offered in good faith and is believed to be accurate. To be eligible for a Rainguard Warranty the following must occur: 1. A site visit must be conducted by an employee or agent of Rainguard and a Field Inspection Report completed. 2. A Warranty Application must be fully completed by the applicator. 3. Field Inspection Report, Warranty Application, and a copy of the distributor’s invoice must be submitted to and approved by Rainguard.
PAGE 3
Technical Data Customer Service Help-Line 800.272.4647 Water Based Urethane 31% Of-White Emulsion in can Slight Latex Smell <50 g/L V.O.C. Compliant 20 - 25 @ 60° Non-Flammable Approximately 7.5 9.6 Seconds No. 4 Ford Cup Approximately 8.5 lbs./Gal. Approx. 1 Hour 24-72 Hours RainguardPro.com Page 3 of 3 Rainguard® Clear-Seal Acrylic Material Type Volume Solids Color of Material Odor V.O.C.