Specifications
Pumps and Filtration
64www.rainbird.com
PUMPS AND FILTRATION
I and G Series Hydraulic Suction Scanning Filter
“I & G Series” Hydraulic Suction Scanning Filter
Rain Bird®’s Hydraulic Suction Scanning Filters provide
worry‑free 300 micron (standard) filtered water quality.
The bodies of standard “I & G” filters are made from
high‑grade, low‑carbon steel and are protected by a
durable polyester epoxy powder‑coating, both inside
and out. Powered by source line water pressure, the
filter’s backwashing system produces high velocity
reverse water flow to clean the screen of trapped
contaminants. Suspended solids accumulate on the
inner surface of screen, building up a filter layer and
creating a pressure differential. Once the pressure
differential reaches a preset level a rinse cycle is initiated
by the controller. The process takes a matter of seconds,
without interruption of system flow. Standard wire
mesh screens are supported to virtually eliminate the
possibility of screen collapse, even under the most
challenging conditions. All Rain Bird® “I & G Series” filters
are also available in Stainless Steel construction for the
most demanding water quality applications. Models
are available as a filter unit only, or as a filter assembly
including bypass plumbing. (Note: G Series has a fine
screen only, while I Series has a coarse and fine screen).
The standard Rain Bird automatic control system is based
on a differential pressure switch and a solenoid actuated
flush valve. The filtration system is automatically
monitored and controlled either on elapsed time (since
the last cleaning cycle) or pressure differential, when the
differential pressure exceeds 7 psi (user definable).
Optional SS screen sizes available for 50, 80, 100, 150
or 200 micron.
“GSERIES” SUCTION SCANNING FILTER PERFORMANCE DATA
Powder-Coated
Carbon Steel Model Number
Stainless Steel
Model Number
Maximum Flow
US gpm m
3
/Hour
Max
Pressure (psi)
Inlet / Outlet
Flange Size (in)
Flush Line
Size (in)
Minimum Inlet Pressure
During Rinse Cycle (psi)
FILTER ONLY
HS-G-06-LS-G HS-G-06-LS-S-G 650 147.6 150 6 3 30
HS-G-06-LE-G HS-G-06-LE-S-G 850 193.1 150 6 3 30
HS-G-08-LS-G HS-G-08-LS-S-G 1300 295.3 150 8 3 30
HS-G-10-LS-G HS-G-10-LS-S-G 1750 397.5 150 10 3 30
FILTER ASSEMBLY WITH BYPASS MANIFOLD
HS-G-06-LS-B-G HS-G-06-LS-S-B-G 650 147.6 150 6 3 30
HS-G-06-LE-B-G HS-G-06-LE-S-B-G 850 193.1 150 6 3 30
HS-G-08-LS-B-G HS-G-08-LS-S-B-G 1300 295.3 150 8 3 30
HS-G-10-LS-B-G HS-G-10-LS-S-B-G 1750 397.5 150 10 3 30
DS-G-060-LE-B-G DS-G-06-LE-S-B-G 1700 386.2 150 10 3 30
DS-G-080-LS-B-G DS-G-08-LS-S-B-G 2600 590.6 150 10 3 30
DS-G-100-LS-B-G DS-G-10-LS-S-B-G 3500 795.0 150 12 3 30
* Filter flow is based on 200 micron and above filtration of clear irrigation water. Appropriate flow de-rating is required for excessive debris loads (silt, organics, algae, etc.), reclaim water
and finer screens. Contact Rain Bird for filter selection assistance for these applications.
(shown as filter only)
HS-G-03-LE-G
“ISERIES” SUCTION SCANNING FILTER PERFORMANCE DATA
Powder -Coated
Carbon Steel Model Number
Stainless Steel
Model Number
Maximum Flow
US gpm m3/Hour
Max
Pressure (psi)
Inlet / Outlet
Flange Size (in)
Flush Line
Size (in)
Minimum Inlet Pressure
During Rinse Cycle (psi)
FILTER ONLY
HS-I-06-PE-G HS-I-06-PE-S-G 650 147.6 150 6 4 30
HS-I-08-PS-G HS-I-08-PS-S-G 1200 272.6 150 8 4 30
HS-I-08-PE-G HS-I-08-PE-S-G 1500 340.7 150 8 4 30
HS-I-10-PS-G HS-I-10-PS-S-G 1750 397.5 150 10 4 30
HS-I-10-PE-G HS-I-10-PE-S-G 2000 454.3 150 10 4 30
HS-I-12-PS-G HS-I-12-PS-S-G 2500 567.9 150 12 4 30
FILTER ASSEMBLY WITH BYPASS MANIFOLD
HS-I-06-PE-B-G HS-I-06-PE-S-B-G 650 147.6 150 6 4 30
HS-I-08-PS-B-G HS-I-08-PS-S-B-G 1200 272.6 150 8 4 30
HS-I-08-PE-B-G HS-I-08-PE-S-B-G 1500 340.7 150 8 4 30
HS-I-10-PS-B-G HS-I-10-PS-S-B-G 1750 397.5 150 10 4 30
HS-I-10-PE-B-G HS-I-10-PE-S-B-G 2000 454.3 150 10 4 30
HS-I-12-PS-B-G HS-I-12-PS-S-B-G 2500 567.9 150 12 4 30
DS-I-08-PE-B-G DS-I-08-PE-S-B-G 3000 681.5 150 12 4 30
DS-I-10-PS-B-G DS-I-10-PS-S-B-G 3500 795.0 150 12 4 30
DS-I-10-PE-B-G DS-I-10-PE-S-B-G 4000 908.6 150 14 4 30
DS-I-12-PS-B-G DS-I-12-PS-S-B-G 5000 1135.8 150 14 4 30
(shown as filter only)
HS-I-08-PE-G