Specifications
Gear-Driven Rotors
41www.r ainbird.com
GEAR-DRIVEN ROTORS
EAGLE™ 351B Series
EAGLE 351B SERIES PERFORMANCE DATA — U.S.
BASE PRESSURE
60 PSI 70 PSI 80 PSI 90 PSI
Radius Flow Radius Flow Radius Flow Radius Flow
Nozzle (ft) (gpm) (ft) (gpm) (ft) (gpm) (ft) (gpm)
LOW FLOW
18S White 18 1.8 20 1.9 20 2.0 22 2.2
22S Dark Gray 22 2.2 22 2.4 24 2.5 26 2.7
26S Dark Orange 24 2.6 24 2.8 26 3.1 26 3.2
30S Light Green 30 3.0 30 3.1 32 3.2 32 3.4
36S Brown 34 3.6 34 3.8 34 4.2 36 4.4
HIGH FLOW
18M Ivory 20 4.0 22 4.2 22 4.4 24 4.7
26M Medium Orange 24 5.6 24 6.0 26 6.5 26 6.9
30M Green 30 5.7 30 6.2 32 6.6 32 7.1
36M Light Brown 34 7.1 34 7.8 34 8.4 36 8.9
LONG THROW
40 Orange 40 2.1 40 2.3 42 2.4 42 2.5
44 Red 44 3.5 46 3.6 46 4.1 46 4.3
48 Blue 48 5.8 48 6.4 48 6.8 48 7.0
54 Beige 50* 12.4* 54* 13. 5* 56* 14.6* 56* 15.5*
EAGLE 351B SERIES PERFORMANCE DATA — METRIC
BASE PRESSURE
4.1 BAR 4.8 BAR 5.5 BAR 6.2 BAR
Radius Flow Flow Radius Flow Flow Radius Flow Flow Radius Flow Flow
Nozzle (m) (lps) (m/h) (m) (lps) (m/h) (m) (lps) (m /h) (m) (lps) (m /h)
LOW FLOW
18S White 5.5 0.11 0.41 6.1 0.12 0.43 6.1 0.13 0.45 6.7 0.14 0.50
22S Dark Gray 6.7 0.14 0.50 6.7 0.15 0.55 7.3 0.16 0.57 7.9 0.17 0.61
26S Dark Orange 7.3 0.16 0.60 7.3 0.18 0.64 7.9 0.20 0.70 7.9 0.20 0.73
30S Light Green 9.1 0.19 0.68 9.1 0.20 0.70 9.8 0.20 0.73 9.8 0.21 0.77
36S Brown 10.4 0.23 0.82 10.4 0.24 0.86 10.4 0.26 0.95 11.0 0.28 1.00
HIGH FLOW
18M
†
Ivory 6.1 0.25 0.91 6.1 0.26 0.95 6.7 0.28 1.00 7.3 0.30 1.07
26M
†
Medium Orange 7.3 0.35 1.27 7.3 0.38 1.36 7.9 0.41 1.48 7.9 0.44 1.57
30M
†
Green 9.1 0.36 1.30 9.1 0.39 1.41 9.8 0.42 1.50 9.8 0.45 1.61
36M
†
Light Brown 10.4 0.45 1.61 10.4 0.49 1.77 10.4 0.53 1.91 11.0 0.56 2.02
LONG THROW
40 Orange 12.2 0.13 0.48 12.2 0.15 0.52 12.8 0.15 0.55 12.8 0.16 0.57
44 Red 13.4 0.22 0.80 14.0 0.23 0.82 14.0 0.26 0.93 14.0 0.27 0.98
48 Blue 14.6 0.37 1.32 14.6 0.40 1.45 14.6 0.43 1.55 14.6 0.44 1.60
54 Beige 15.2* 0.78* 2.82* 16.5* 0.85* 3.07* 17.1* 0.92* 3.32* 17.1* 0.98* 3.52*
•
EAGLE™ 351B Series
EAGLE™ 351B Series
SPECIFICATIONS
Radius: 18' to 56' (5.5 m to 17.1 m)
Arc: 360° in full-circle mode, adjustable from 50°
to 330° in part-circle mode
Flow Rate: 1.8 to 15.5 gpm (0.11 to 0.98 l/s)
Models:
EAGLE™ 351B: Seal-A-Matic™ device
Maximum Inlet Pressure: 100 psi (6.9 bar)
Recommended Operating Pressure: 60 psi (4.1 bar),
70 psi (4.8 bar), 80 psi (5.5 bar)
Flow:
Full-Circle Mode: 360° ≤ 180 seconds;
120 seconds nominally
Part-Circle Mode: 180° ≤ 90 seconds;
60 seconds nominally
Inlet Threads: 1" (2.5 cm) ACME
Holdback: 10' (3.1 m) of elevation
Nozzle Trajectory: 17° and 25°
Maximum Stream Height: 13' (4.0 m)
Dimensions:
Body Height: 9.6" (24.5 cm)
Top Diameter: 4.25" (10.8 cm)
Pop-Up Height to Mid-Nozzle: 3.25" (8.3 cm)
HOW TO SPECIFY
AT – 351 – B – XX(X)
Model
351
Body/
Valve
B
Nozzle**
18S 22S
26S 30S
36S 30s
18M
†
26M
†
30M
†
36M
†
40 44
48 54
Thread
Type
AT
*For best results, recommended for use in triangular spacing only.
†
Matched precipitation nozzles.
Data reflects no pressure regulation. For a block rotor, it is the pressure at the inlet to the rotor casing after the pressure had been regulated through a valve. All data is
generated from tests conducted in accordance with ASAE Standard S398.1 for at least 30 minutes, in zero-wind conditions. Rain Bird recommends the use of SPACE for
Windows,® equivalent programming or derived performance data to optimize nozzle selection.
**Nozzle Shipping: (Standard Nozzle Installed/Included Smaller and Larger Nozzles): 22S/18S, 26S 30S/26S, 36S 30M
†
/18M,
†
26M,
†
36M
†
36S/40, 44 48/44, 54
Low
Flow
High
Flow
Long
Throw