Specifications

Gear-Driven Rotors
34www.rainbird.com
GEAR-DRIVEN ROTORS
Rain Bird® 700/751 Series Rotors
Rain Bird® 700/751 Series
SPECIFICATIONS
Radius:
Rain Bird® 700 Series: 56' to 79' (17.1 m to 24.1 m)
Rain Bird® 751 Series: 35' to 75' (10.7 m to 22.9 m)
Flow Rate:
700 Series: 16.3 to 43.9 gpm (1.03 to 2.76 l/s)
(3.70 to 9.95 m/h)
751 Series: 7.0 to 37.7 gpm (0.44 to 2.38 l/s)
(1.59 to 8.56 m/h)
Arc:
700 Series: Full-circle 360°
751 Series: Full-circle 360°; Adjustable 30° to 345°
Models:
Full-Circle:
700E: Electric
700IC: Integrated Control
700S/H: Combined use Stopamatic (SAM)
or Hydraulic (N.O.)*
700B: Seal-A-Matic™ device
Part-Circle:
751E: Electric
751IC: Integrated Control
751S/H: Combined use Stopamatic (SAM)
or Hydraulic (N.O.)*
751B: Seal-A-Matic™ device
Maximum Inlet Pressure:
Models 700/751E and IC: 150 psi (10.3 bars)
Models 700/751S/H and B: 100 psi (6.9 bars)
Pressure Regulation Range: 60 to 100 psi
(4.1 to 6.9 bars)
Factory Pressure Settings: 700E/IC and 751E/IC
available in 60, 70 and 80 psi (4.1, 4.8 and 5.5 bars)
Inlet Threads:
Models E, IC, S/H: 1.25" (3.2 cm) ACME
Female Threaded
Models B: 1" (2.5 cm) ACME Female Threaded
Dimensions:
Body Height:
Models E, IC, S/H: 12.0" (30.5 cm)
Models B: 9.6" (24.5 cm)
Pop-Up Height to Mid-Nozzle:
Models E, IC, S/H, B: 2.6" (6.6 cm)
Top Diameter:
Models E, IC, S/H: 6.25" (15.9 cm)
Models B: 4.25" (10.8 cm)
Rotation Time:
700 Series: 360° in ≤ 180 seconds;
150 seconds nominally
751 Series: 180° in ≤ 90 seconds;
75 seconds nominally
Holdback:
Block: 10' (3.1 m) of elevation
SAM/Hydraulic: 15' (4.6 m) of elevation
Nozzle Trajectory:
Standard: 25°
Wind Tolerant: 12°
Low-Angle: 17°
Maximum Stream Height:
Standard: 17' (5.2 m)
Wind Tolerant: 10' (3.1 m)
Solenoid: 24 VAC solenoid power requirement:
0.41 amp inrush current (9.8 VA);
60 cycle: 0.25 amp holding current (6.0 VA);
50 cycle: 0.32 amp holding current (7.7 VA)
Surge Resistance: Up to 20KV standard on
electric models
Top-Serviceable Rock Screen™ and
Replaceable Valve Seat: On models 700E,
IC, S/H and 751E, IC, S/H
* N.O. — Normally open
All data is generated from tests conducted
in accordance with ASAE Standard S398.1
for at least 30 minutes in zero-wind
conditions. Rain Bird recommends the
use of SPACE for Windows,® equivalent
program or derived performance data to
optimize nozzle selection.
•
751 Series
A – 751 – X – XX – XX
Model
751
Body/
Valve
E
IC
S/H
B
Thread
Type
ACME
HOW TO SPECIFY
•
700 Series
HOW TO SPECIFY
A – 700 – X – XX – XX
Model
700
Body/
Valve
E
IC
S/H
B
Nozzle
28
32
36
40
44
48
Thread
Type
ACME
Pressure
Regulator
60 (4.1)
70 (4.8)
80 (5.5)
Pressure
Regulator
60 (4.1)
70 (4.8)
80 (5.5)
Nozzle
20
22
28
32
36
40
44
48