Specification

www.rainbird.com/drip
115
www.rainbird.com
Drip Irrigation
115
Landscape Drip
Emission Devices
*Unthread to access 200-mesh
(75-micron) screen
**Unthread to access
independent flow ports
Union base nut permits removal
from riser without tangling
1
⁄ 4 " tubing
Optional PRS-050-30
Pressure Regulator in-stem
XBD-80
Xeri-Bird
™
8-Outlet Emission Device
The Most Flexible and Feature-Rich Multi-Outlet Device on the
Market, Ideal for New Projects and Retrofit Applications
Features
• The only multi-outlet device on the market with 8 congurable ports and
10 ow options for each port for maximum exibility
• XBD-80 and XBD-81 models each contain a built-in lter. Makes retro-
tting easy when installed with the optional in-stem pressure regulator
(PRS-050 page 155)
• Easy to maintain, because body can be easily removed from riser
• Threads onto any
1
⁄2" riser and delivers water to multiple locations for
increased system exibility
• Each port accepts a Xeri-Bug™ Emitter or PC Module for independent
ows from 0.5 to 24 gph (1.89 to 90.84 l/h) or use a self-piercing barb
connector (SPB-025) for unrestricted ow
• XBD-80 and XBD-81 models each feature an integral 200 mesh (75
micron) lter which is easily serviceable from the top of the unit
• Eight bottom-mounted, sure-grip barbed outlets securely retain
1
⁄4" Distribution Tubing (XQ)
• Unique union base nut allows removal of Xeri-Bird 8 body from riser for
easy installation and maintenance
• Emitters must be installed inside the Xeri-Bird to prevent excess back
pressure
Operating Range
• Flow: 0.5 to 24 gph (1.89 to 90.84 l/h) per outlet
• Pressure: 15 to 50 psi (1.0 to 3.5 bar)
Models
• XBD-80: Xeri-Bird 8 unit (includes 7 removable port plugs and lter)
• XBD-81: Xeri-Bird 8 unit (includes eight 1 gph (3.79 l/h) Xeri-Bug emitters
factory installed, and lter)
Replacement Parts:
• XBD8SCRN: replacement screen and two o-rings
Each port can be configured on the Xeri-Bird™ by installing
flow controlled emitters. Above shows a combination of 0.5,
1.0, and 2.0 gph Xeri-Bug emitters.
Helpful Hint: Always install emitters
with the pointed end (inlet barb) or threaded
end up, as shown
* Must be installed second
** Must be installed first